Report Store
Showing 49–60 of 210 results
-
UAE’s Steel Sections Market outlook Report
10,027€
- TRY: 365,000 ₺
Steel sections include beams with H and I cross sections as well as other products with T, Z, and U cross sections. I-beams are the most commonly used steel sections. The infrastructure sector also uses steel sections in bridges, steel structures, and wharfs. Estimates suggest that the UAE’s sections market will have relative growth in the coming years.
[View details]
-
UAE’s Steel PPGI Market Outlook Report
10,027€
- TRY: 365,000 ₺
Produced in different colors, pre-painted galvanized iron (PPGI) has a range of applications in industries. The construction industry is the largest consumer of PPGI as ceilings and walls of warehouses and workshops, false ceilings, and internal and external design for buildings. Estimates suggest that the UAE’s PPGI market will decline over the coming years compared to the previous years, even without supply tightness of galvanized sheets.
[View details]
-
Saudi Arabia’s Copper RBS Market Outlook Report
10,027€
- TRY: 365,000 ₺
The dimensions of copper and brass rods, bars, and sections (RBS) are determined by their cross section shapes and sizes. Generally, RBS come in round, square or rectangular, and hexagonal cross sections; round RBS cross sections range from 1.5mm to 90mm. Polygonal RBS can be from 4mm to 80mm in cross section diameter. RBS in smaller cross section sizes are sold in coils, while other products are sold as straight lengths. RBS are also categorized as hollow and solid. Copper busbars are produced in round and flat forms in different sizes. These products are mostly produced through the extrusion of billets as raw materials. However, busbars and strips are partly produced from rolled copper wire rod.
[View details]
-
United Arab Emirates’ Aluminum Scrap and Waste Market Outlook Report
10,027€
- TRY: 365,000 ₺
The low energy consumption required for recycling aluminum makes the process important. The energy required to recycle aluminum is about 4-5% of the energy that is needed to produce the light-weight metal from bauxite. Thus, recycling aluminum will result in 95% energy saving. Aluminum scrap and waste fall into two general categories: new and old scrap. New scrap is metal that is left over during the production of finished products or semis. Old scrap, on the other hand, is metal from end-of-life goods. Aluminum scrap can be used by producers with melting capacities.
[View details]
-
UAE’s Zinc Unwrought Market Outlook Report
10,027€
- TRY: 365,000 ₺
A major part of unwrought zinc is produced from the leaching of oxide ore in sulfuric acid and the electrowinning process. The UAE’s demand for unwrought zinc is mostly met through imports, with domestic output taking a small share.
[View details]
-
UAE’s Welded Steel Pipe Market Outlook Report
10,027€
- TRY: 365,000 ₺
Produced in different sizes, welded steel pipes have various applications in a number of industries. Infrastructure is the largest consumer of welded steel pipes in the oil and gas industry. Steel pipes are also used in central heating systems, air conditioning, as well as low-pressure oil transfer, while galvanized pipes are used in water supply systems. Moreover, stainless steel pipes are used to transfer liquids such as hot water, sulfur, chemicals and petrochemicals, food and drugs, oil and gas processing, wastewater systems, and water treatment equipment.
[View details]
-
UAE’s Steel Rebar Market Outlook Report
10,027€
- TRY: 365,000 ₺
Steel rebar is produced in different diameters according to the intended use. Steel bars are also produced as mild steel plain bars (without ribs). Rebar is packed as irregularly wound coils or bars. Carbon steel rebar is the most commonly used type in construction. Rebar is used in reinforced concrete to improve tensile strength. The construction industry is the largest consumer of rebar in columns and frames for residential and industrial buildings as well as hospitals. Estimates suggest that the UAE’s rebar market will have relative growth and oversupply in the coming years.
[View details]
-
Saudi Arabia’s Copper Wire Rod Market Outlook Report
10,027€
- TRY: 365,000 ₺
Copper wire rod includes products with diameters of 6mm or greater (known as rod) and smaller than 6mm (known as wire). It includes the following types (in all cross sections):
- Electrolytic cathode wire rod (ASTM B49 standard)
- Oxygen-free wire rod (ASTM B49 standard)
- Oxygen-free alloy wire rod (EN1977)
The first two types of wire rod have a minimum copper content of 99.99%. Alloy wire rod contains trace amounts (less than 0.1%) of silver with a total copper-silver content of 99.99%.
It should be noted that clean, high-grade scrap is used as part of the furnace feed in the production of copper wire rod, but this depends on production technology. Wire rod produced from scrap usually requires control and further processing to be converted into standard products for electrical applications. Thus, wire rod from scrap is partly used in non-electrical applications.
[View details]
-
UAE’s Steel GRC Market Outlook Report
10,027€
- TRY: 365,000 ₺
Produced in different thicknesses, steel galvanized rolled coils (GRC) have a range of applications in industries. GRC can be converted into pre-painted galvanized iron (PPGI) or directly used in various industries. It is also used as raw material to produce pipes and sections. The construction industry is the largest consumer of GRC. Estimates suggest that the UAE’s GRC market will have relative growth and oversupply in the coming years.
[View details]
-
Saudi Arabia’s Aluminum Foil Market Outlook Report
10,027€
- TRY: 365,000 ₺
Most of the aluminum foil produced in Saudi Arabia uses continuous casting and rolling. Perishable food and drug packaging as well as disposable containers are the most important applications of aluminum foil. Most of the country’s demand is met through imports, with domestic output taking a small share of the market. Saudi Arabia’s food and drug industry has grown over the years, bolstering demand for aluminum foil.
[View details]
-
Saudi Arabia’s Aluminum Unwrought Market Outlook Report
10,027€
- TRY: 365,000 ₺
Aluminum smelters (unwrought producers) fall into two categories: primary and secondary smelters. Molten aluminum cast as unwrought products can be produced either through alumina electrolysis in primary smelters or through remelting scrap and pure ingots in secondary smelters. Primary smelting is a cost-intensive process; thus, such plants are usually large-scale producers that can be economical with capacities above 100,000 tonnes. But remelting aluminum in secondary smelters requires much lower costs, making small-scale capacities economical.
Secondary smelting capacity is limited in Saudi Arabia and most of the unwrought aluminum comes from Ma’aden’s primary smelter. Unwrought aluminum is in three forms: ingots, billets, and slabs. While aluminum ingots are produced through single-batch casting of molten aluminum in 1,000lb or 50lb molds, slab and billets are produced through direct chill casting. Ingots are re-melted before use, but billets and slabs are usually extruded and rolled, respectively, into profiles and flat products. Considering there is only one integrated hot rolling mill in the country that also produces slabs, it does not offer its slabs in the market.
[View details]
-
Oman’s Welded Steel Pipe Market Outlook Report
10,027€
- TRY: 365,000 ₺
Produced in different sizes, welded steel pipes have various applications in a number of industries. Infrastructure is the largest consumer of welded steel pipes in the oil and gas industry. Steel pipes are also used in central heating systems, air conditioning, as well as low-pressure oil transfer, while galvanized pipes are used in water supply systems. Moreover, stainless steel pipes are used to transfer liquids such as hot water, sulfur, chemicals and petrochemicals, food and drugs, oil and gas processing, wastewater systems, and water treatment equipment.
[View details]