Report Store
Showing 169–180 of 210 results
-
Saudi Arabia’s Crude Steel Market Outlook Report
10,027€
- TRY: 365,000 ₺
Crude steel comes in different forms such as slabs, billets and blooms, and ingots. Produced using continuous casting, slabs, billets, and blooms take the largest share of Saudi Arabia’s crude steel market. Slabs are used to produce intermediate flat products (such as hot-rolled coil), while billets and blooms are used to produce long products (such as rebar and sections). Generally, almost all crude steel can be divided into two major categories based on production method: blast furnaces (BF) and electric furnaces (EF). EFs used in steelmaking include induction furnaces and electric arc furnaces (EAF). Only EFs are used to produce steel in Saudi Arabia, almost all of which are EAFs.
[View details]
-
Oman’s Steel Cold Rolled Coils Market Outlook Report
10,027€
- TRY: 365,000 ₺
Produced in different thicknesses, steel cold-rolled coils (CRC) have a range of applications in industries. CRC can be converted into galvanized sheets, tinplate, and pre-painted galvanized iron (PPGI) or directly used in various industries. It is also used as raw material to produce pipes and sections. The transportation industry is the largest consumer of CRC. Estimates suggest that Oman’s CRC market will be facing oversupply in the coming years.
[View details]
-
Iran’s Steel Hot Rolled Coil Market Outlook Report
10,027€
- TRY: 365,000 ₺
Produced in different thicknesses, steel hot-rolled coils (HRC) have a range of applications in industries. HRC can be converted into cold-rolled coils (CRC), galvanized sheets, tinplate, and pre-painted galvanized iron (PPGI) or directly used in various industries. It is also used as raw material to produce pipes and sections. The transportation industry is the largest consumer of HRC. Estimates suggest that Iran’s HRC market will have relative growth in the coming years. On the demand side, despite higher prices in rial terms due to the depreciation of the rial against the US dollar, demand for steel HRC will increase.
[View details]
-
Turkey’s Steel Rebar Market Outlook Report
10,027€
- TRY: 365,000 ₺
Steel rebar is produced in different diameters according to the intended use. Steel bars are also produced as mild steel plain bars (without ribs). Rebar is packed as irregularly wound coils or bars. Carbon steel rebar is the most commonly used type in construction. Rebar is used in reinforced concrete to improve tensile strength. The construction industry is the largest consumer of rebar in columns and frames for residential and industrial buildings as well as hospitals. Estimates suggest that Turkey’s rebar market will have relative growth and oversupply in the coming years.
[View details]
-
Turkey’s Iron Ore Fine and Concentrate Market Outlook Report
10,027€
- TRY: 365,000 ₺
Iron ore from mines generally has a grade below 50%; using it to produce crude steel, although technically possible, incurs high production costs and the economy is annulled due to the low recovery rate. Thus, most steelmakers use iron ore with grades above 60% to economically justify their operations. Iron ore processed to be used in the steel chain is in either of two forms: fine, and concentrate. Moreover, iron ore can be divided into magnetite and hematite ore depending on ore type. The easier processing of magnetite iron ore to remove deleterious elements has resulted in higher premiums for this type of iron ore on the market.
[View details]
-
Turkey’s Ferroalloy Market Outlook Report
10,027€
- TRY: 365,000 ₺
Ferroalloys are the most important consumables for steelmakers, used to remove impurities or produce steel alloys. Ferrosilicon, ferromanganese, and ferrosilicomanganese are some of the most commonly used ferroalloys. Ferrosilicomanganese, which contains both manganese and silicon, has a growing market ahead; the share of this ferroalloy in providing the manganese required in steelmaking is rapidly growing, en route to dominate the ferromanganese market among global steelmakers. Ferrosilicomanganese is more commonly used by steelmakers that use minerals to produce steel. Since a large part of Turkey’s steel is produced from recycled scrap, these ferroalloys are not used as commonly.
[View details]
-
Iran’s Ferroalloy Market Outlook Report
10,027€
- TRY: 365,000 ₺
Ferroalloys are the most important consumables for steelmakers, used to remove impurities or produce steel alloys. Ferrosilicon, ferromanganese, and ferrosilicomanganese are some of the most commonly used ferroalloys. Ferrosilicomanganese, which contains both manganese and silicon, has a growing market ahead; the share of this ferroalloy in providing the manganese required in steelmaking is rapidly growing, en route to dominate the ferromanganese market among global steelmakers. Ferrosilicomanganese is more commonly used by steelmakers that produce steel from primary material. The ratio of ferroalloys used in Iran’s steel production will be significant.
[View details]
-
Global and Middle East Trade Trend of Flat Rolled Products of Alloyed Steel
137€
- TRY: 5,000 ₺
Global trade of alloyed steel rolled products has considerably increased during recent years. Not only did the imports and exports volume of already importers and exporters increase, but also new importers appeared boosting the growth of trade volume. The demand in Iran and Turkey as major importers in the Middle East was surged, leading to increasing imports of the region.
[View details]
-
Global and Middle East Trade Trend of Flat Rolled Products of Stainless Steel
137€
- TRY: 5,000 ₺
The global trade volume of flat rolled products of stainless steel has increased in recent years. Notably, China has succeeded to rise amongst the top exporters of these products. Growing production of stainless steel in China supported production of flat rolled ones, as the most important shape of stainless steel. Meanwhile the total imports of the Middle East countries have increased, which Turkey supplied considerably. Existence of developing economies in the region along with lack of rolling mills for stainless steel, has brought out the region as a potentially perfect target market.
[View details]
-
Global and Middle East Trade Trend of Stainless Steel Ingots
137€
- TRY: 5,000 ₺
One of key primary materials in high-tech industries are stainless steel ingots. Accordingly, its demand is higher among developed countries; Sweden, France and the United States are the greatest importers of stainless steel ingots. In respect to geographical distribution of demand, production capacities implemented close to the consumers. Hence, major exporters of such products are among developed countries, in which England was one of them. Nevertheless, some of Asian countries have coupled among major exporters/ importer in the globe.
[View details]
-
Global and Middle East Trade Trend of Stainless Steel Wire
137€
- TRY: 5,000 ₺
Volume trade of stainless steel was almost constant during recent years. China and India were the key exporters of stainless steel wire, and Germany was the biggest importer. Others experienced changes either in supply side or demand side, among which growth imports of Indonesia and disruptions to Luxemburg’s exportation were some of them. Although share of west Asian countries is not notable in global trade, but UAE and KSA are considered as some of the major importers and exporters across the world.
[View details]
-
Turkey Flat Rolled Products of Stainless Steel Market Overview
137€
- TRY: 5,000 ₺
In accordance with industrial growth in Turkey during recent years, consumption of rolled stainless steel products has increased. Since the outlook of economical growth of this country is highly encouraging, it is expected that the future of demand of flat rolled products of stainless steel rise. Since there are no flat stainless steel producers in Turkey, the majority of the demand is supplied by importing. Asians have been the essential suppliers to this market.
[View details]