Report Store
Showing 61–72 of 99 results
-
Turkey’s Copper Wire Rod Market Outlook Report
9,817€
- TRY: 475,000 ₺
Copper wire rod includes products with diameters of 6mm or greater (known as rod) and smaller than 6mm (known as wire). It includes the following types (in all cross sections):
- Electrolytic cathode wire rod (ASTM B49 standard)
- Oxygen-free wire rod (ASTM B49 standard)
- Oxygen-free alloy wire rod (EN1977)
The first two types of wire rod have a minimum copper content of 99.99%. Alloy wire rod contains trace amounts (less than 0.1%) of silver with a total copper-silver content of 99.99%.
It should be noted that clean, high-grade scrap is used as part of the furnace feed in the production of copper wire rod, but this depends on production technology. Wire rod produced from scrap usually requires control and further processing to be converted into standard products for electrical applications. Thus, wire rod from scrap is partly used in non-electrical applications.
[View details]
-
Turkey’s Steel Cold-Formed Sections Market Outlook Report
9,817€
- TRY: 475,000 ₺
Steel cold-formed sections (CFS) are produced in various shapes with wide applications in different industries. The construction industry is the largest consumer of CFS in columns, frames, doors and windows, fences, and railings. Steel CFS is produced in two forms: open-seam and welded sections with various industrial and constructional applications. A major portion of CFS is used in manufacturing doors and windows. CFS with small square and rectangular cross sections is used as grill for doors and windows, railings for staircases, and fences. Open CFS sections are used in the ceilings of industrial sheds and guardrails. Estimates suggest that Turkey’s steel CFS market will decline over the coming years compared to the previous years, even without supply tightness of sheets.
[View details]
-
Turkey’s Steel GRC Market Outlook Report
9,817€
- TRY: 475,000 ₺
Produced in different thicknesses, steel galvanized rolled coils (GRC) have a range of applications in industries. GRC can be converted into pre-painted galvanized iron (PPGI) or directly used in various industries. It is also used as raw material to produce pipes and sections. The construction industry is the largest consumer of GRC. Estimates suggest that Turkey’s GRC market will have relative growth and oversupply in the coming years.
[View details]
-
Turkey’s Telecom Wire and Cable Market Outlook Report
9,817€
- TRY: 475,000 ₺
Telecom wires and cables include not only those with copper conductors, but also optical fiber as well as a combination of both. Telecom wires and cables are used to send and receive data signals, where speed is particularly important. Thus, the structure of the cables varies depending on their applications in general use and military telecom systems. Copper conductor or optical fiber is used in these cables to transfer data. The layout of the core (whether copper or optical fiber) also affects transfer speed. Coaxial cables have metal conductors and shields that not only reduce electromagnetic noise, but also contribute to data transfer.
[View details]
-
Turkey’s Winding Wire Market Outlook Report
9,817€
- TRY: 475,000 ₺
Winding wire is part of the copper products supply chain, in the wire and cable category. Winding wire (usually with an enamel coating) is used in automotive, electronic and electromechanical equipment, home appliances, and lighting. As one of the early steps in the supply chain of wires and cables with metal conductors, metal wire rod is drawn into wires in different diameters, which are then coated with different insulations based on applications. The quality of the conductor and the enamel used in the production of winding wire significantly affects the end product; production technology also affects the quality of winding wire. In older technologies, annealing followed drawing, but in more recent technologies, the two processes are carried out simultaneously, saving time and costs.
[View details]
-
Turkey’s Mined Iron Ore Market Outlook Report
9,817€
- TRY: 475,000 ₺
Iron ore from mines generally has a grade below 50%; using it to produce crude steel, although technically possible, incurs high production costs and the economy is annulled due to the low recovery rate. Thus, most steelmakers use iron ore with grades above 60% to economically justify their operations. Iron ore can be divided into magnetite and hematite ore depending on ore type. Mined iron ore is mostly used in steelmaking, with only a small part of lower-quality ore types used in other industries such as cement production.
[View details]
-
Turkey’s Copper PSSF Market Outlook Report
9,817€
- TRY: 475,000 ₺
Flat copper products include plates, sheets, strips, and foil (PSSF). They are available as pure copper products as well as alloy products. Sheets, strips, and foils are available both in coils and pre-cut pieces. Alloy PSSF, especially brass products, have the widest range of applications; these are used in switches, sockets, electrical connectors, artisanal handicrafts, ammunition, and automobile radiators. Copper PSSF are also used in electrical connectors, printed circuit boards, HVAC, home appliances, artisanal handicrafts, and shipbuilding. Moreover, electrical applications, coin blanks, and telecom equipment are some of the most important applications of alloy PSSF such as copper-nickel, bronze-tin, and bronze-phosphorus.
[View details]
-
Turkey’s Aluminum Extrusions Market Outlook Report
9,817€
- TRY: 475,000 ₺
Thanks to their various shapes, aluminum extrusions have wide applications in different industries. Among the consumer industries, the construction sector is the largest consumer of extrusions in curtain walls and aluminum doors and windows. Estimates suggest that Turkey’s aluminum extrusion market will expand over the coming years thanks to improved exports. On the demand side, consumption is expected to grow as construction increases.
[View details]
-
Turkey’s Iron Ore Pellet Market Outlook Report
9,817€
- TRY: 475,000 ₺
Iron ore pellets generally fall into two categories: direct reduction grade, and blast furnace grade. Direct reduction pellets are mostly used in the production of DRI and usually have higher grades and premiums, while blast furnace pellets are used in blast furnaces and generally have lower premiums. Since DRI is not produced in Turkey, it can be concluded that the majority of pellets used in the country are blast furnace grade. It should be noted that blast furnaces account for less than a third of the country’s crude steel output.
[View details]
-
Saudi Arabia’s Crude Steel Market Outlook Report
9,817€
- TRY: 475,000 ₺
Crude steel comes in different forms such as slabs, billets and blooms, and ingots. Produced using continuous casting, slabs, billets, and blooms take the largest share of Saudi Arabia’s crude steel market. Slabs are used to produce intermediate flat products (such as hot-rolled coil), while billets and blooms are used to produce long products (such as rebar and sections). Generally, almost all crude steel can be divided into two major categories based on production method: blast furnaces (BF) and electric furnaces (EF). EFs used in steelmaking include induction furnaces and electric arc furnaces (EAF). Only EFs are used to produce steel in Saudi Arabia, almost all of which are EAFs.
[View details]
-
Turkey’s Steel Rebar Market Outlook Report
9,817€
- TRY: 475,000 ₺
Steel rebar is produced in different diameters according to the intended use. Steel bars are also produced as mild steel plain bars (without ribs). Rebar is packed as irregularly wound coils or bars. Carbon steel rebar is the most commonly used type in construction. Rebar is used in reinforced concrete to improve tensile strength. The construction industry is the largest consumer of rebar in columns and frames for residential and industrial buildings as well as hospitals. Estimates suggest that Turkey’s rebar market will have relative growth and oversupply in the coming years.
[View details]
-
Turkey’s Iron Ore Fine and Concentrate Market Outlook Report
9,817€
- TRY: 475,000 ₺
Iron ore from mines generally has a grade below 50%; using it to produce crude steel, although technically possible, incurs high production costs and the economy is annulled due to the low recovery rate. Thus, most steelmakers use iron ore with grades above 60% to economically justify their operations. Iron ore processed to be used in the steel chain is in either of two forms: fine, and concentrate. Moreover, iron ore can be divided into magnetite and hematite ore depending on ore type. The easier processing of magnetite iron ore to remove deleterious elements has resulted in higher premiums for this type of iron ore on the market.
[View details]