Report Store
Showing 1–12 of 41 results
-
Turkey’s Ferrous Scrap and Waste Market Outlook Report
9,795€
- TRY: 475,000 ₺
Ferrous scrap includes steel and iron scrap that is either produced during fabrication (new scrap) or when end-of-life products are scrapped (old scrap). Regardless of how it is produced, there are different types of scrap including heavy melting scrap, light-weight scrap, black sheet, busheling, and turnings. Demand for heavy melting scrap, which contains more steel and iron, is stronger. Over 90% of steel scrap in Turkey is used by crude steel producers, but producers of cast iron parts and ferroalloys are also major scrap consumers. The country’s crude steel output is forecast to increase in the future.
[View details]
-
Turkey’s Aluminum Scrap and Waste Market Outlook Report
9,795€
- TRY: 475,000 ₺
The low energy consumption required for recycling aluminum makes the process important. The energy required to recycle aluminum is about 4-5% of the energy that is needed to produce the light-weight metal from bauxite. Thus, recycling aluminum will result in 95% energy saving. Aluminum scrap and waste fall into two general categories: new and old scrap. New scrap is metal that is left over during the production of finished products or semis. Old scrap, on the other hand, is metal from end-of-life goods. Aluminum scrap can be used by producers with melting capacities, which include producers of secondary unwrought, casting parts, sheets and plates, and wire rod in Turkey. A major portion of these products are produced by secondary smelters. Given the importance of scrap and waste, the market is expected to grow over the coming years.
[View details]
-
Turkey’s Copper Mine Market Outlook Report
9,795€
- TRY: 475,000 ₺
Output from copper ore processing includes concentrates, SXEW cathode, or cement copper. Copper concentrate is produced in concentrators that use sulphide ore as feed. SXEW cathode is produced in hydrometallurgical plants using oxide ore as feed. Cement copper is produced in hydrometallurgical (cementation) plants that can use oxide ore or copper scrap as feed. Copper concentrate in Turkey’s market has an average grade between 24% and 26%. Cement copper in Turkey, like global markets, does not have a significant share and the grades are between 69% and 71%. Finally, SXEW cathode is produced according to global standards with 99.99% grades, which is equivalent to the LME’s grade A cathode.
[View details]
-
Turkey’s Aluminum Casting Parts Market Outlook Report
9,795€
- TRY: 475,000 ₺
Aluminum casting parts are part of the downstream supply chain of the aluminum industry; raw materials for the sector include both primary and secondary sources. One of the unique properties of aluminum in addition to the high specific strength and its high electrical and thermal conductivity, is the relatively low melting point that makes casting possible at low costs. Aluminum casting parts are produced using a variety of processes. Among these, pressure die casting and permanent mold casting are the most common. Sand casting also takes a considerable share of the market owing to low initial cost requirements.
[View details]
-
Turkey’s Refined Copper Market Outlook Report
9,795€
- TRY: 475,000 ₺
Blister, anode, and refined copper (including ER and EW cathode) are the most important upstream copper products following mine production. Blister and anode are produced in smelting furnaces; in some technologies, anode is directly produced from concentrate without being converted into blister. Refined copper is produced in copper refineries. In electrorefining, anode is converted into cathode, whereas in electrowinning, water solution with copper content is precipitated and cathode is produced.
[View details]
-
Turkey’s Lead and Zinc Concentrate Market Outlook Report
9,795€
- TRY: 475,000 ₺
Lead and zinc are usually found together in mines; almost 70% of total global mine production of lead comes from reserves that contain both minerals. Thus, lead concentrate is produced inevitably when producing zinc concentrate; there is a strong correlation between the mine output of these metals. Since zinc is more abundant in the Earth’s crust, lead and zinc mines generally contain more zinc than lead. Most of the lead mine supply in Turkey is from lead-zinc mines, with very few mines that contain only lead ore.
[View details]
-
Turkey’s Copper Tube Market Outlook Report
9,795€
- TRY: 475,000 ₺
Copper and alloy tubes in Turkey’s market fall into three categories: copper, brass, and alloy (excluding brass), respectively accounting for the largest share of consumption. Tubes are available as coils (including pancake coils and level wound coils) and straight lengths. But alloy and brass tubes are not available as coils due to their larger diameter and limited flexibility; thus, they are sold as straight lengths.
[View details]
-
Turkey’s Steel Tinplate Market Outlook Report
9,795€
- TRY: 475,000 ₺
Tinplate is mostly used in packaging. This makes the consumable goods industry the main consumer of tinplate. Transportation manufacturing also uses tinplate in battery covers for cars. Estimates suggest that Turkey’s tinplate market will have relative growth and oversupply over the coming years.
[View details]
-
Turkey’s Steel PPGI Market Outlook Report
9,795€
- TRY: 475,000 ₺
Produced in different colors, pre-painted galvanized iron (PPGI) has a range of applications in industries. The construction industry is the largest consumer of PPGI as ceilings and walls of warehouses and workshops, false ceilings, and internal and external design for buildings. Estimates suggest that Turkey’s PPGI market will decline over the coming years compared to the previous years, even without supply tightness of sheets.
[View details]
-
Turkey’s Refined Lead Market Outlook Report
9,795€
- TRY: 475,000 ₺
A major part of unwrought lead is produced from secondary sources. Refined lead is mostly used in the production of lead-acid batteries; this makes old batteries the most important raw material for refined lead production. In addition to used batteries, lead concentrate is also used as feed by refined producers; the ratio varies depending on the availability of the materials.
[View details]
-
Turkey’s Steel Sections Market Outlook Report
9,795€
- TRY: 475,000 ₺
Steel sections include beams with H and I cross sections as well as other products with T, Z, and U cross sections. I-beams are the most commonly used steel sections. The infrastructure sector also uses steel sections in bridges, steel structures, and wharfs. Estimates suggest that Turkey’s sections market will have relative growth in the coming years.
[View details]
-
Turkey’s Unwrought Copper Market Outlook Report
9,795€
- TRY: 475,000 ₺
Unwrought copper is an intermediate group of products that includes slabs, billets, and ingots; it is used as raw material to produce copper semis and downstream products. It should be noted that ingots have a wider range of applications and are also used to produce billets and slabs. Alloy intermediate products (especially brass) account for the largest share of demand. This is because brass RBS have stronger demand compared to other copper semis.
[View details]