Copper
Showing 13–24 of 52 results
-
UAE’s Wire and Cable Market Outlook Report
10,146€
- TRY: 365,000 ₺
In terms of applications, wires and cables can be categorized as electrical, telecom, and winding wire. Electrical wires and cables include all electrical conductors in the power industry (both HV and LV), automotive, construction, equipment and machinery, or in other words, all industrial applications. Telecom wires and cables include twisted pairs, high-frequency cables, coaxial cables, optical fiber, and a combination of copper and optical fiber. Winding wire has a thin coating and is mostly used in coil windings.
[View details]
-
Saudi Arabia’s Copper RBS Market Outlook Report
10,146€
- TRY: 365,000 ₺
The dimensions of copper and brass rods, bars, and sections (RBS) are determined by their cross section shapes and sizes. Generally, RBS come in round, square or rectangular, and hexagonal cross sections; round RBS cross sections range from 1.5mm to 90mm. Polygonal RBS can be from 4mm to 80mm in cross section diameter. RBS in smaller cross section sizes are sold in coils, while other products are sold as straight lengths. RBS are also categorized as hollow and solid. Copper busbars are produced in round and flat forms in different sizes. These products are mostly produced through the extrusion of billets as raw materials. However, busbars and strips are partly produced from rolled copper wire rod.
[View details]
-
Saudi Arabia’s Copper Wire Rod Market Outlook Report
10,146€
- TRY: 365,000 ₺
Copper wire rod includes products with diameters of 6mm or greater (known as rod) and smaller than 6mm (known as wire). It includes the following types (in all cross sections):
- Electrolytic cathode wire rod (ASTM B49 standard)
- Oxygen-free wire rod (ASTM B49 standard)
- Oxygen-free alloy wire rod (EN1977)
The first two types of wire rod have a minimum copper content of 99.99%. Alloy wire rod contains trace amounts (less than 0.1%) of silver with a total copper-silver content of 99.99%.
It should be noted that clean, high-grade scrap is used as part of the furnace feed in the production of copper wire rod, but this depends on production technology. Wire rod produced from scrap usually requires control and further processing to be converted into standard products for electrical applications. Thus, wire rod from scrap is partly used in non-electrical applications.
[View details]
-
Saudi Arabia’s Wire and Cable Market Outlook Report
10,146€
- TRY: 365,000 ₺
In terms of applications, wires and cables can be categorized as electrical, telecom, and winding wire. Electrical wires and cables include all electrical conductors in the power industry (both HV and LV), automotive, construction, equipment and machinery, or in other words, all industrial applications. Telecom wires and cables include twisted pairs, high-frequency cables, coaxial cables, optical fiber, and a combination of copper and optical fiber. Winding wire has a thin coating and is mostly used in coil windings.
[View details]
-
Iran’s Copper Casting Parts Market Outlook Report
10,146€
- TRY: 365,000 ₺
Casting parts are not generally categorized as finished products and are used in the fabrication of other products; based on composition, they fall into copper parts (non-alloy), brass parts, and alloy parts (excluding brass). Alloy and brass parts constitute the largest market share. Copper parts are used in industrial products such as parts for welding machines, steel casting molds, and artisanal handicrafts, while brass parts have wider applications including tools and equipment (locks and keys, zippers, door handles, rims and trims, bolts and nuts, etc.), faucets and valves for water and gas, home lighting and decorative products, auto parts, etc.
[View details]
-
Iran’s Copper PSSF Market Outlook Report
10,146€
- TRY: 365,000 ₺
Flat copper products include plates, sheets, strips, and foil (PSSF). They are available as pure copper products as well as alloy products. Sheets, strips, and foils are available both in coils and pre-cut pieces. Alloy PSSF, especially brass products, have the widest range of applications; these are used in switches, sockets, electrical connectors, artisanal handicrafts, ammunition, and automobile radiators. Copper PSSF are also used in electrical connectors, printed circuit boards, HVAC, home appliances, artisanal handicrafts, and shipbuilding. Moreover, electrical applications, coin blanks, and telecom equipment are some of the most important applications of alloy PSSF such as copper-nickel, bronze-tin, and bronze-phosphorus.
[View details]
-
Iran’s Copper Mine Market Outlook Report
10,146€
- TRY: 365,000 ₺
Output from copper ore processing includes concentrates, SXEW cathode, or cement copper. Copper concentrate is produced in concentrators that use sulphide ore as feed. SXEW cathode is produced in hydrometallurgical plants using oxide ore as feed. Cement copper is produced in hydrometallurgical (cementation) plants that can use oxide ore or copper scrap as feed. Copper concentrate in Iran’s market has an average grade between 24% and 26%; yet some mines such as Ghale Zari with relatively higher gold and silver content produce copper concentrate with a grade of 15%. Cement copper in Iran, like global markets, does not have a significant share and the grades are between 69% and 71%. Finally, SXEW cathode is produced according to global standards with 99.99% grades, which is equivalent to the LME’s grade A cathode.
[View details]
-
Iran’s Copper RBS Market Outlook Report
10,146€
- TRY: 365,000 ₺
The dimensions of copper and brass rods, bars, and sections (RBS) are determined by their cross section shapes and sizes. Generally, RBS come in round, square or rectangular, and hexagonal cross sections; round RBS cross sections range from 1.5mm to 90mm. Polygonal RBS can be from 4mm to 80mm in cross section. RBS in smaller cross section sizes are sold in coils, while other products are sold as long pieces. RBS are also categorized as hollow and solid. Copper busbars are produced in round and flat forms in different sizes. These products are mostly produced through the extrusion of billets as raw materials. However, busbars and strips are partly produced from rolled copper wire rod.
[View details]
-
Iran’s Unwrought Copper Market Outlook Report
10,146€
- TRY: 365,000 ₺
Unwrought copper is an intermediate group of products that includes slabs, billets, and ingots; it is used as raw material to produce copper semis and downstream products. It should be noted that ingots have a wider range of applications and are also used to produce billets and slabs. Alloy intermediate products (especially brass) account for the largest share of demand. This is because brass RBS have stronger demand compared to other copper semis.
[View details]
-
Iran’s Copper Tube Market Outlook Report
10,146€
- TRY: 365,000 ₺
Copper and alloy tubes in Iran’s market fall into three categories: copper, brass, and alloy (excluding brass), respectively accounting for the largest share of consumption. Tubes are available as coils (including pancake coils) and long pieces. But alloy and brass tubes are not available as coils due to their larger diameter and limited flexibility; thus, they are sold as long pieces.
[View details]
-
Iran’s Copper Wire Rod Market Outlook Report
10,146€
- TRY: 365,000 ₺
- Copper wire rod includes products with diameters of 6mm or greater (known as rod) and smaller than 6mm (known as wire). It includes the following types (in all cross sections):
- Electrolytic cathode wire rod (ASTM B49 standard)
- Oxygen-free wire rod (ASTM B49 standard)
- Oxygen-free alloy wire rod (EN1977)
The first two types of wire rod have a minimum copper content of 99.99%. Alloy wire rod contains trace amounts (less than 0.1%) of silver with a total copper-silver content of 99.99%.
It should be noted that clean, high-grade scrap is used as part of the furnace feed in the production of copper wire rod, but this depends on production technology. Wire rod produced from scrap usually requires control and further processing to be converted into standard products for electrical applications. Thus, wire rod from scrap is partly used in non-electrical applications.
-
Saudi Arabia’s Power Wire and Cable Market Outlook Report
10,146€
- TRY: 365,000 ₺
Power wires and cables include all electrical conductors used in the power industry, automotive, construction, equipment and machinery, or put another way, all industrial applications. As one of the early steps in the supply chain of wires and cables with metal conductors, metal wire rod is drawn into wires in different diameters, which are then coated with different insulations based on applications. Wires are also used in wiring harnesses for motor vehicles. Finally, wires (coated or otherwise) are twisted into cables. Copper is the main conductor used in the production of power wires and cables in Saudi Arabia.
[View details]