Aluminium
Showing 1–8 of 44 results
-
Saudi Arabia’s Aluminum Scrap and Waste Market Outlook Report
10,015€
- TRY: 365,000 ₺
The low energy consumption required for recycling aluminum makes the process important. The energy required to recycle aluminum is about 4-5% of the energy that is needed to produce the light-weight metal from bauxite. Thus, recycling aluminum will result in 95% energy saving. Aluminum scrap and waste fall into two general categories: new and old scrap. New scrap is metal that is left over during the production of finished products or semis. Old scrap, on the other hand, is metal from end-of-life goods. Aluminum scrap can be used by producers with melting capacities.
[View details]
-
United Arab Emirates’ Aluminum Foil Market Outlook Report
10,015€
- TRY: 365,000 ₺
Most of the aluminum foil produced in the United Arab Emirates uses continuous casting and rolling. Perishable food and drug packaging as well as disposable containers are the most important applications of aluminum foil. Most of the country’s demand is met through imports, with domestic output taking a small share of the market. The United Arab Emirates’ food and drug industry has grown over the years, bolstering demand for aluminum foil.
[View details]
-
Iran’s Aluminum Scrap and Waste Market Outlook Report
10,015€
- TRY: 365,000 ₺
The low energy consumption required for recycling aluminum makes the process important. The energy required to recycle aluminum is about 4-5% of the energy that is needed to produce the light-weight metal from bauxite. Thus, recycling aluminum will result in 95% energy saving. Aluminum scrap and waste fall into two general categories: new and old scrap. New scrap is metal that is left over during the production of finished products or semis. Old scrap, on the other hand, is metal from end-of-life goods. Aluminum scrap can be used by producers with melting capacities, which include producers of secondary unwrought, casting parts, sheets and plates, and wire rod in Iran. A major portion of these products are produced by secondary smelters. Given the importance of scrap and waste, the market is expected to grow over the coming years.
[View details]
-
United Arab Emirates’ Aluminum Unwrought Market Outlook Report
10,015€
- TRY: 365,000 ₺
Aluminum smelters (unwrought producers) fall into two categories: primary and secondary smelters. Molten aluminum cast as unwrought products can be produced either through alumina electrolysis in primary smelters or through remelting scrap and pure ingots in secondary smelters. Primary smelting is a cost-intensive process; thus, such plants are usually large-scale producers that can be economical with capacities above 100,000 tonnes. But remelting aluminum in secondary smelters requires much lower costs, making small-scale capacities economical.
Secondary smelting capacity is limited in the United Arab Emirates and most of the unwrought aluminum comes from EGA’s primary smelter. Unwrought aluminum is in three forms: ingots, billets, and slabs. While aluminum ingots are produced through single-batch casting of molten aluminum in 1,000lb or 50lb molds, slab and billets are produced through direct chill casting. Ingots are re-melted before use, but billets and slabs are usually extruded and rolled, respectively, into profiles and flat products. With no integrated hot rolling mills in the country, there is no domestic supply of slabs.
[View details]
-
United Arab Emirates’ Aluminum Casting Parts Market Outlook Report
10,015€
- TRY: 365,000 ₺
Aluminum casting parts are part of the downstream supply chain of the aluminum industry; raw materials for the sector include both primary and secondary sources. One of the unique properties of aluminum in addition to the high specific strength and its high electrical and thermal conductivity, is the relatively low melting point that makes casting possible at low costs. Aluminum casting parts are produced using a variety of processes. Among these, pressure die casting and permanent mold casting are the most common. Sand casting also takes a considerable share of the market owing to low initial cost requirements.
The possibility of casting aluminum into complex shapes has translated into wide applications of casting parts in various industries. On a global scale, the automotive industry is the largest consumer of aluminum casting parts; however, in the United Arab Emirates, construction, followed by durable goods (with a smaller share), is the largest consumer of aluminum casting parts.
[View details]
-
United Arab Emirates’ Aluminum Sheet and Plate Market Outlook Report
10,015€
- TRY: 365,000 ₺
A major portion of aluminum sheets and plates fall in the non-heat-treatable alloy category. Series 3xxx and 5xxx alloys take the largest market share. There are also series 1xxx alloy sheets and plates, mainly used in electrical applications. Aluminum sheets and plates in the United Arab Emirates are mostly produced using cold rolling.
Packaging for chemicals and beverages, false ceilings, dampa ceilings and tiles, as well as composite panels are some of the main applications of aluminum sheets and plates. Domestic demand for aluminum beverage can in the United Arab Emirates is met almost entirely from imports. Construction and chemicals are the main consumers of aluminum sheets in the Arab country.
[View details]
-
United Arab Emirates’ Aluminum Extrusions Market Outlook Report
10,015€
- TRY: 365,000 ₺
Thanks to their various shapes, aluminum extrusions have wide applications in different industries. Among the consumer industries, the construction sector is the largest consumer of extrusions in curtain walls and aluminum doors and windows. Due to the United Arab Emirates’ hot climate, the construction industry has moved towards using more insulation products, such as curtain walls and double-glazed doors and windows, which will not only minimize energy loss, but also have much lower installation costs in tall, big buildings compared to other types of façade.
[View details]
-
United Arab Emirates’ Aluminum Wire Rod Market Outlook Report
10,015€
- TRY: 365,000 ₺
Aluminum wire rod is generally produced using one of three processes: continuous casting and rolling, direct casting, and extrusion. The production process affects the dimensions, shape, quality, and purity of the wire rod. Most of the wire rod produced through extrusion is packed in bundles, but wire rod that is produced through casting is often packed as coils. Most of the wire rod coil produced in the United Arab Emirates is through continuous casting and rolling. The process involves the continuous casting of billets and then rolling it into wire rod with the desired thickness.
The production of aluminum wires and cables accounts for the main consumption of wire rod. Mechanical applications such as rivets, screws, fences, and meshes are also large consumers. Demand for aluminum wires and cables from electrical industries and related consumers is expected to be steady over the coming years.
[View details]